The answer is easy; polyurethane foam injection! This process is where a two part polymer is injected under the concrete slab and once it starts to expand, will re-compact loose soils in addition to lift the concrete slab back into place. There use to be an older technique called mud-jacking but it was put to shame with the capability of poly foams. Call Level Home Foundation Repair if you are experiencing sinking concrete. The Estimate is free and will leave you with a good understanding of the problems and solutions for repair. 800-472-1366 or visit our site at: www.levelhomefoundationrepair.com
Everyone claims their lifting foam is "the best" on the market. As a quality leader in the industry, we provide more than vague statements and marketing slogans on this issue.
Here's a detailed list of the advantages you'll enjoy with Level Home Foundation Repairs AP Lift 430 and AP Lift 475 lifting foams:
No Recycled Materials
The products are made of virgin raw materials only. They are consistent and clean, with no particulates floating around.
Water Blown Formula
Your drum set of material will be consistent from top to bottom. Whether you pump it all in one day or all in one month. No mixing will be required.
Lower Exotherm
You'll be able to fill voids, stabilize soil and lift slabs faster. In addition, unlike some other foams out there, these foams have no history of smoke or charring.
Cured Foam is Safe for Contact with Drinking Water
These foams are certified To NSF 61-5. That means that the cured foam is safe for contact with potable water. Most of the time your foam won't ever come into contact with drinking water, but this certification assures your customers that once the foam cures it will not pose any kind of environmental or health hazard.
Consistent Quality
You won't have to worry about your foam setting up one way this month and another way next month. The NSF certification and the ISO 9001 certification require the exact same formula for every single drum set. We have both certifications.
DOT Grade Polyurethane Foam
DOT grade foams cure faster, work in wet conditions, and are traffic ready in 45 minutes. Use less material and get less call-backs with foams that meet the standards for Department of Transportation work.
If you are in the
check out our TX site at www.levelhomedfw.com
Comments